OilBase White Original Primer, Sealer and Stain Blocker is suitable for application on most interior surfaces such as furniture, drywall, plaster, woodwork, paneling, wallpaper, masonry, brick, painted metal and properly prepared glossy surfaces. It blocks smoke and water stains and it seals pet odors. It provides an ideal base coat for latex and oilbase paints.
Available in: 1 Gl. & 5 G.
Clean, dull and dry surface
Stir paint thoroughly
Start at ceiling edge
Paint "N" pattern - fill in
Paint trim last
Where to use: Walls, cabinets, ceilings, trim and doors. Use over drywall, wood, concrete/brick, plaster and wallpaper.
How much do you need: For one coat coverage, apply at a maximum of 400 square feet per gallon. Rough or texture surfaces may require more allow for 125300 square feet per gallon. Do not thin.
What tools to use: May be applied with a quality roller, a nylon/polyester brush, or a paint pad.
How to apply: Room and surface temperature must be 50 degrees Fahrenheit. Allow at least 4 hours of drying time before recoating. Mix gallons together for color and sheen uniformity when using more than one gallon of the same product.
Care for freshly painted surfaces: Freshly painted surfaces may be washed after 30 days. Until then avoid touching, wiping, or wetting the surface. Then clean with mild, nonabrasive, nonoily cleanser and water. Do not place objects on painted surfaces until thoroughly dry. Soap and water cleanup.
How to prepare the surface Previously Painted Surfaces: Remove loose paint, wash with a mild, nonabrasive, nonoily cleanser and water. Rinse completely, let dry. Patch holes and cracks with spackling paste and let dry. Sand patched area and wipe residue. Sand all smooth or glossy surfaces, rinse well.